KORREK Pro Foam Pre-Wash is a highly effective foaming pre-wash cleaner. The alkaline formula (pH 10.5) is suitable for cleaning all exterior car surfaces.
The foaming pre-wash effectively removes road salt, grease, tar, oils, and other stubborn dirt. Designed for use with a foam cannon, but can also be applied from a pump bottle like a standard pre-wash. Biodegradable, contains no silicone or wax.
Package size: 3 L
Operating temperature
+5 – +25°C. Do not allow the detergent to dry on the surface or apply it to hot surfaces. Shake before use.
Instructions for use
Dilute a suitable solution in a foam sprayer and apply the foam to the surfaces to be cleaned. About 100–200 ml of pre-wash diluted into a 10% solution is enough for washing one passenger car. The recommended solution strength is 5–10%. For very heavy dirt, up to a 20% solution may be used. Solutions below 10% are safe for waxed surfaces. pH 10.5.
Allow the foam to work for 2–4 minutes, then rinse thoroughly with plenty of water, working from bottom to top. Do not allow the detergent to dry on treated surfaces. Do not apply pre-wash or foam to hot surfaces.
Protect from frost.
Corrosive (GHS05)
H315 – Causes skin irritation.
H318 – Causes serious eye damage.
P102 – Keep out of reach of children.
P302+P352 – IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
Aqua
Trisodium Dicarboxymethyl Alaninate
PPG-2 Methyl Ether
Sodium Laureth Sulfate
Propylene Glycol Butyl Ether
Citric Acid
Colour
Link to ingredient explanations: http://ec.europa.eu/growth/tools-databases/cosing
Measurements (L x W x H) mm: 115 x165 x 230
Gross weight: 3.2300kg
Manufacturer: Berner Oy, Hitsaajankatu 24, 00810 Helsinki
SKU: 15790279
EAN: 6414505137583
The coatings in the KORREK Pro product line are based on user-safe SiO₂ technology, which allows you to apply a ceramic thin film coating yourself. Regular protection helps prevent various external stresses from directly affecting the car’s clear coat.
The KORREK Pro TFC™ products are suitable for all exterior surfaces of the car, so there’s no need to avoid certain areas as with waxing. A ceramic coating also provides longer-lasting protection than traditional wax, as it is more resistant to chemicals and other external factors. A KORREK Pro TFC™-coated car repels dirt, making washing significantly easier. The KORREK Pro range also includes detergents that make cleaning effortless and extend the life of the ceramic coating.
All KORREK Pro products are developed and tested in Finland and manufactured in Heinävesi.
